
FACTORY DIRECT · CUSTOM MANUFACTURING · GLOBAL SUPPLY
Cable Ladders Direct from Manufacturer
Ladder-type cable tray for heavy power cables and long spans. L1–L7 series, widths 50–1200 mm, hot-dip galvanized, pre-galvanized, stainless steel and aluminum options for industrial projects.

ISO 9001 · ISO 14001 · ISO 45001 | UDEM Attestation of Conformity No. M.2023.206.C88198 — model HF01A, EN 61537:2007

Prefer WhatsApp? Chat with Jason →
Documents on file: ISO 9001:2015 (Guang Hui No. GH005-2023Q0022) · ISO 14001:2015 (No. GH005-2023E0015) · ISO 45001:2018 (No. GH005-2023S0015) · JB/T 10216-2013 sample type-test reports. An attestation of conformity is not a blanket product certification, and test reports cover the samples tested.
Cable Ladder Products
Built around two rails and open rungs
The ladder range is the L1–L7 series in steel, stainless and aluminum — straights plus the fittings that turn them into a complete run. Tell us the style in the inquiry and the quotation will cite the table used.








Engineering Specifications
Size it from the table, not from a claim
The range below is published in the family data and the catalog. Anything not numbered here is confirmed with your quotation — send your span and loading and the quotation will cite the curve and table used.
| Width | 50–1200 mm |
|---|---|
| Side Rail Height | 10–200 mm |
| Material Thickness | 0.5–3.0 mm |
| Materials | Q235 steel · Stainless 201 / 304 / 316 · Aluminum 6061-T6 / 6063-T5 |
| Rung Spacing | Standard / Custom |
| Surface Finish | HDG · Pre-Galvanized · Electro-Galvanized · Stainless · Aluminum · ZAM · Powder Coated |
| Loading Capacity | SWL per size — see the load chart (catalog p.016) |
| Support Span | Large-span configurations approx. 12 m; other spans per engineering requirements |
Test basis: uniform-load vs. span curves prepared to DIN EN IEC 61537 (catalog p.016). SWL per size is confirmed with your quotation.
Production · Inspection · Shipping
Made, measured and shipped under our own roof
Your ladder sizes run on our own lines — rails and rungs made in our own plant. View Quality Documents → Planning the lift or the freight? Estimate ladder weight with our weight calculator.



Quality control & delivery
Measured before it ships, photographed before it seals
Every batch is checked for coating thickness and dimensions before packing, and third-party inspection is welcome at our factory. Containers are piece-counted against the packing list and photographed before sealing.





Quality & Compliance
Quality Assurance & Technical Compliance
Quality documentation and applicable test reports available for project review.

An attestation of conformity is not a blanket product certification, and test reports cover the samples tested. Documents are shared on request for project review.
Applications
Where ladders carry the load
Open rungs, heavy cables and long spans — the ladder format fits plant corridors, switchgear rooms and distribution runs where ventilation and cable access matter.

Ladder runs on trapeze and wall supports carrying power and control cables across the plant.

Heavy power cables on overhead ladder runs above switchgear and distribution boards.
Application illustrations. Actual project specifications and installations may vary.
Common questions
Before you send your inquiry
Can you make custom sizes?
Yes. Ladders are built to order in widths 50–1200 mm, side heights 10–200 mm and thicknesses 0.5–3.0 mm, and customized drawings are accepted. Send your size in the inquiry and the quotation will confirm it.
What surface finishes do you offer?
Electro-galvanized (zinc 8–25 µm), pre-galvanized 40 / 80 / 275 g/m², hot-dip galvanized 45 / 65 / 85 µm, ZAM, and powder coated.
How are span and load verified?
The catalog publishes uniform-load vs. span curves for the L series prepared to DIN EN IEC 61537 (catalog p.016). SWL per size — see the load chart. Large-span configurations reach approx. 12 m. Send your span and loading and the quotation will cite the curve used.
How can I get a quotation?
Send your BOQ or drawings through the form above, or WhatsApp Jason directly — he replies personally with a priced offer.
Can I send my BOQ or drawings?
Yes. Attach PDF, Excel, DWG or ZIP files to the form above, or send them by WhatsApp or email to [email protected].
What quality documents are available?
ISO 9001 / 14001 / 45001 certificates, the UDEM attestation of conformity for model HF01A, and JB/T 10216-2013 sample test reports — shared on request for project review. Test reports cover the samples tested.
Get a project quote
Send your BOQ or drawings — Jason replies personally with a priced offer.
Custom specifications and project quantities welcome.

