Cable Ladder
Heavy-duty ladder for long spans and large cable bundles.
- Width50–1200 mm
- Thickness0.5–3.0 mm
- FinishesPre-galv · HDG · Stainless · Aluminum
Hongfeng · Cable Tray Manufacturer
Factory-Direct Cable Tray Systems for Global Projects
Perforated Cable Trays, Cable Ladders, Wire Mesh Trays and Cable Trunking — manufactured to your project specifications.
Custom Sizes|HDG, Pre-Galvanized & Stainless Steel|Complete Fittings
Product range — by type
Six systems, built in-house
Six systems produced on our own lines — pick the format your run needs, then the material below. Trays, fittings, covers and the strut supports that carry them ship together in one order.
Perforated Cable Tray
Ventilated trough tray for power and control cables.
- Width50–1200 mm
- Thickness0.5–3.0 mm
- FinishesPre-galv · HDG · Stainless · Powder
Trough Cable Tray
Fully enclosed solid-bottom tray that shields sensitive cables.
- Width50–1200 mm
- Thickness0.5–3.0 mm
- FinishesPre-galv · HDG · Stainless · Powder
Long-Span Cable Tray
Heavy sections that cross wide spans with fewer supports.
- Section length3,000 mm
- ConstructionHeavy ladder · trough
- Load basisDIN EN IEC 61537 curves
Wire Mesh Cable Tray
Basket tray — fast to install, easy bends and drops on site.
- Wire Ø3.5–6.0 mm
- Width50–1200 mm
- FinishesPre-galv · HDG · Stainless
Strut Channel
41 mm C channel framing — the trapeze and bracket system that carries the trays.
- Profiles41×21 · 41×41 mm
- Thickness1.2–2.5 mm
- FinishesPre-galv · HDG
Product range — by material
Six materials & finishes
The same systems, in the material your environment demands. These six lines are main products here, not side lines — from mill-galvanized sheet for dry interiors to stainless and FRP where coated steel is not enough. Pick the material and the tray system follows.
Galvanized Cable Tray
Mill-galvanized sheet steel — the economical standard for indoor runs.
- Zinc coating40 / 80 / 275 g/m²
- Also availableElectro-galv 8–25 µm
- ForIndoor · dry · buildings
Hot-Dip Galvanized Cable Tray
Galvanized after fabrication — every edge, hole and weld coated.
- Zinc layer45 / 65 / 85 µm
- ProcessHot-dip after fabrication
- ForOutdoor · coastal · solar
Stainless Steel Cable Tray
The grade matched to your exposure — no coating to fail.
- Grades201 · 304 · 316
- Width50–1200 mm
- ForChemical · food · marine
FRP Cable Tray
Glass-fiber reinforced polyester — nothing in it can rust, and it does not conduct.
- MaterialFRP / GRP composite
- Key propertyCorrosion-proof · insulating
- ForChemical · wastewater · coastal
Aluminum Cable Tray
Lightweight alloy tray for weight-critical and corrosive duties.
- Grades6061-T6 · 6063-T5
- FormsSheet · extruded profile
- ForFood · data rooms · coastal
Powder Coated Cable Tray
Epoxy powder coat over steel — color-coded routes, fire-rated builds.
- CoatingEpoxy powder · electrostatic
- ColorsStandard · custom
- ForBuildings · basements · power
Why Hongfeng
Built around your project spec
Can you make my sizes, in my finish, as one complete shipment? These are the numbers from our own lines and catalog — the answer, up front.
50–1200 mm
Tray widths across the tray systems
0.5–3.0 mm
Steel thickness range, sized to your load
45 / 65 / 85 µm
Hot-dip galvanized coating grades
40 / 80 / 275 g/m²
Pre-galvanized zinc coating options
201 · 304 · 316
Stainless grades — plus aluminum 6061-T6 / 6063-T5
OEM / ODM
Custom sizes, lengths and fittings to your drawings
One complete shipment — straights, fittings, covers and supports counted and packed together.
Photographed before sealing — loading photos are shared with you before the container closes.
One factory price — send a BOQ and Jason prices it personally. No middlemen, no re-quoting.
Manufacturing
From steel coil to loaded container
Coils are punched and roll-formed on our own automatic lines — profiles stay consistent across a whole project.
Fittings are folded and welded in-house, so bends and tees match the straights in size and finish.
Pre-galvanized, hot-dip galvanized, powder coated or stainless — the finish is applied and checked before packing.
Sizes and finishes are checked piece by piece, then bundled, wrapped and palletised for export.
Factory Tour Video
Watch the factory floor
Inside the production hall — forming lines running, punching, bending and finished-goods staging in one building. Watch the full walk-through right here — filmed on our own floor, no stock footage.
- Forming & Punching Lines
- In-House Surface Treatment
- QC Before Packing
- Photo-Confirmed Loading
Running a project BOQ? Send it over for a factory price
Interactive
Explore the complete system
A cable tray run is more than straight lengths. Tap a numbered part to see how the system fits together — then quote the whole run in one inquiry.
Fittings & accessories
Every fitting, matched to your tray
Fittings are made from the same steel and finish as your straights — supplied counted, packed, and ready to install.
90° Horizontal Bend
Widths 50–1200 mm · finish matched to tray
Horizontal Tee
Equal & reducing · widths 50–1200 mm
Horizontal Cross
Four-way branch · widths 50–1200 mm
Reducer
Straight, offset & reducing · custom sizes
Tray Cover
Solid / vented · formed to tray width
Splice Plates & Bolts
Plates, bolts, nuts & washers for every joint
…plus support hardware — strut channel, cantilever arms & hangers counted into the same shipment. See fittings, covers & support hardware
Project references
Supplied to projects in three regions
Power Engineering Project
Cable trays & fittings
Tray systems and fittings supplied for a power engineering project in Saudi Arabia, delivered alongside Shandong Electric Power Company.
Data Center
Cable tray supply
Cable trays supplied for a data center (computing facility) project in Singapore, where clean routing and reliable finishes matter most.
Shopping Mall Power Distribution
Cable tray systems
Cable tray systems supplied for the power distribution of a shopping mall project in the United States.
Project narratives as provided by our sales records; client names and figures are shared in direct discussion where the client permits.
Factory visits
Buyers at our factory
Buyers in our sample room
Overseas buyers visit our sample room to walk the full tray system on display — straights, bends, tees and support hardware — and check finishes and fittings with our export team before they commit to an order.
Drawings & samples, checked together
Specification reviews at our office — your drawings and BOQ checked line by line against physical samples and fittings before anything is quoted.
Meet the team behind your order
The same people who quote your project follow it through production, packing and loading — one contact from first drawing to final container.
Quality & documents
Documents you can verify
The actual documents, cited precisely — issuer, standard and number — so your compliance team can check them.
UDEM Attestation of Conformity
LVD 2014/35/EU · EN 61537:2007 — cable tray model HF01A · No. M.2023.206.C88198 · valid to 25 Jul 2028
ISO 9001:2015 — Quality Management
Guang Hui · No. GH005-2023Q0022 · scope: processing & sales of cable trays and related accessories
ISO 14001:2015 — Environmental Management
Guang Hui · No. GH005-2023E0015 · same certified scope, renewed and within validity
Also on file: ISO 45001:2018 occupational health & safety (Guang Hui No. GH005-2023S0015) and JB/T 10216-2013 sample type-test reports. An attestation of conformity is not a blanket product certification, and test reports cover the samples tested — we describe every document exactly as it is. View certificates & test reports
Packing & dispatch
Finished & ready to ship
Get a factory price
Request a Quote
Send your BOQ or drawings — Jason replies personally with a priced offer.