
FACTORY DIRECT · CUSTOM MANUFACTURING · GLOBAL SUPPLY
Wire Mesh Cable Tray Manufacturer
Welded-wire basket tray for fast, flexible cable routing — popular in data centers, commercial buildings and light industrial plants. CM50 / CM85 / CM100 / CM150 straight sections, 3000 mm long, 5.0 mm wire.

ISO 9001 · ISO 14001 · ISO 45001 | UDEM Attestation of Conformity No. M.2023.206.C88198 — model HF01A, EN 61537:2007

Prefer WhatsApp? Chat with Jason →
Documents on file: ISO 9001:2015 (Guang Hui No. GH005-2023Q0022) · ISO 14001:2015 (No. GH005-2023E0015) · ISO 45001:2018 (No. GH005-2023S0015) · JB/T 10216-2013 sample type-test reports. An attestation of conformity is not a blanket product certification, and test reports cover the samples tested.
Wire Mesh Cable Tray Products
Open baskets, fast to route and change
The mesh range is the CM50–CM150 series in steel wire and stainless — straight sections plus the accessories that connect and support them. Bends, tees, crosses, reducers and level changes are field-made from straight sections on site — no finished mesh bend is sold.




Engineering Specifications
Size it from the table, not from a claim
The range below is published in the family data and the catalog. Anything not numbered here is confirmed with your quotation — send your width, height and support spacing and the quotation will cite the table used.
| Type | Wire mesh / basket tray — CM50 / CM85 / CM100 / CM150 |
|---|---|
| Straight sections | 3000 mm long · wire diameter 5.0 mm · widths to 600 mm in published tables |
| Heights | 50 / 85 / 100 / 150 mm |
| Mesh pitch | 50 mm crosswise · 100 mm lengthwise (25 mm side on CM85) |
| Accessory fit | Wire diameters 3.5–6.0 mm |
| Materials | Steel wire · stainless 201 / 304 / 316 |
| Surface Finish | Pre-galvanized 40 / 80 / 275 g/m² · Hot-dip galvanized 45 / 65 / 85 µm · ZAM · Powder coated (color customizable) |
| Tolerances | Raw material ±0.05 mm · finished size ±2 mm |
| Loading | Catalog support-spacing tables (1.0 / 1.5 / 2.0 / 3.0 m) for 5.0 mm wire; catalog states no unit — quotation states table and unit used |
| Other sizes | Widths over 600 mm, heights outside 50 / 85 / 100 / 150 mm and wire diameters other than 5.0 mm — confirmed with your quotation |
CM85 per-piece weights are pending factory confirmation and no load table is published for CM85 — CM85 weight and load selection are confirmed with your quotation. Mesh sections nest tightly for efficient container loading; connectors and small accessories are counted and boxed separately, labelled by type, inside the same shipment.
Production · Inspection · Shipping
Made, measured and shipped under our own roof
Your mesh sizes run on our own lines — baskets welded in our own plant. View Quality Documents →



Quality control & delivery
Measured before it ships, photographed before it seals
Every batch is checked for coating thickness and dimensions before packing, and third-party inspection is welcome at our factory. Containers are piece-counted against the packing list and photographed before sealing.





Quality & Compliance
Quality Assurance & Technical Compliance
Quality documentation and applicable test reports available for project review.

An attestation of conformity is not a blanket product certification, and test reports cover the samples tested. Documents are shared on request for project review.
Applications
Open runs, fast to change
Open welded-wire construction keeps cables visible, ventilated and easy to add or re-route — in data halls, commercial buildings, under raised floors and on cabinet tops.

Open welded-wire construction that makes adding, moving and ventilating cables fast in machine rooms and data halls.

Lightweight, fast to install and cut to shape on site — suited to tight indoor schedules.
Application images are illustrative. Actual project specifications and installations may vary.
Common questions
Before you send your inquiry
Are mesh bends, tees and reducers finished products?
No. The catalog position is field-made fittings: straight sections are cut on site to form bends, tees, crosses, reducers and level changes. Finished supply covers connectors and supports such as Fastfix, V Connectors and Cable Guider.
Which straight-section sizes are published?
CM50 / CM85 / CM100 / CM150, 3000 mm long, 5.0 mm wire, widths to 600 mm. Other widths, heights and wire diameters are confirmed with your quotation.
How is support spacing chosen?
From the catalog support-spacing tables (1.0 / 1.5 / 2.0 / 3.0 m) by wire diameter and width. The catalog does not state the unit for those load figures, so the quotation will state the table and unit used.
What about MOQ, lead time and finishes?
There is no minimum order quantity for standard products, and many commonly used sizes are kept in stock. Except for very large orders, delivery is normally within 10 days. The exact lead time for your order is confirmed with your quotation. Finishes in the catalog are pre-galvanized 40 / 80 / 275 g/m², hot-dip galvanized 45 / 65 / 85 µm, ZAM and powder coated (color customizable).
How can I get a quotation?
Send your BOQ or drawings through the form above, or WhatsApp Jason directly — he replies personally with a priced offer.
What quality documents are available?
ISO 9001 / 14001 / 45001 certificates, the UDEM attestation of conformity for model HF01A, and JB/T 10216-2013 sample test reports — shared on request for project review. Test reports cover the samples tested.
Get a project quote
Send your BOQ or drawings — Jason replies personally with a priced offer.
Custom specifications and project quantities welcome.

