Liaocheng, Shandong, ChinaEN
ProductsMaterials & FinishesFittings & AccessoriesCertificatesDownloadsContactRequest a Quote

Products · By Material

Polyurethane Cable Tray

Polyurethane cable tray is the infrastructure member of our composite range — the tray specified along highways, in airports and ports, and on road and rail projects. It pairs the corrosion immunity of a polymer with the toughness polyurethane is known for: where a steel tray would rust in salt-laden air and a brittle material would crack under impact, polyurethane keeps its section and keeps carrying cable.

Polyurethane composite cable tray trough section

Configure your variant

Pick a style, material and finish — the matching model rows highlight below, and your selection is written into the inquiry form at the bottom of the page (you can still edit it there).

Why buyers specify it

  • Corrosion-proof in the environments that eat steel: port air, highway spray, de-icing salts and industrial atmospheres — there is no coating to breach because the material itself does not corrode
  • Impact-resistant and tough in tension: polyurethane flexes instead of cracking, which is why it is the composite chosen for transport infrastructure that takes knocks, vibration and weather
  • Electrically non-conductive and maintenance-light: no rust staining on concrete, no re-coating cycle, nothing to earth
  • One material along the whole route: straights and molded fittings in the same polyurethane build, so joints do not become the weak point of the run
Get a price for Polyurethane Cable Tray

Specifications

MaterialPolyurethane composite
ConstructionMolded trough sections with matching fittings
PropertiesCorrosion-resistant · impact-resistant · high tensile strength · non-conductive
SizesWidths, heights and lengths per your project schedule — confirmed in the quotation
Use it whereHighways · airports · ports · road & rail infrastructure

Ranges from the Hongfeng product catalog parameter tables. Exact model tables (SWL / weight per size) are sent with your quotation.

Model table

No numeric model table is published for polyurethane: sizes, spans and loads are selected for the duty and confirmed with your quotation — they are not read off the steel L / P / T tables. In the inquiry form, select “Other / Multiple Products” — your polyurethane selection is written into the message as the Variant line.

Load & installation conditions

As with FRP, polyurethane sections are selected for the duty rather than read off the steel tables: send the route, span and cable load with your BOQ and the quotation states the section proposed for it, with the price, before production is scheduled.

Custom & supply

Polyurethane tray is produced to the project schedule and bundled for export with its molded fittings in the same shipment. Tell us the route drawings with the inquiry and the fittings count comes back inside the quotation, not as a later extra.

Molded polyurethane fittings

Bends, tees and covers for polyurethane runs are molded in the same material as the straights, so the route keeps one corrosion-proof, impact-resistant build from end to end. Fittings are counted from your route drawings and packed into the same shipment as the lengths they join.

See the full fittings & accessories range

Where it is used

Highway & road infrastructure

Cable routes along highways, where spray, salts and weather attack coated steel.

Airports & ports

Salt-laden air and high-traffic infrastructure routes that need a corrosion-proof, impact-resistant tray.

Road & rail projects

Transport-infrastructure routes subject to knocks, vibration and weather.

Corrosive industrial atmospheres

Routes where the material itself must not corrode, with no coating to breach or re-coat.

Frequently asked questions

Can polyurethane tray be selected from the steel load tables?

No. Polyurethane sections are selected for the duty — send the route, span and cable load and the quotation will state the section proposed, with the price.

Which sizes are available?

Widths, heights and lengths follow your project schedule and are confirmed with your quotation.

Are fittings supplied in the same material?

Yes — bends, tees and covers are molded in the same polyurethane build as the straights and counted from your route drawings.

What about MOQ and lead time?

Both are confirmed with your quotation.

Get a factory price

Price for Polyurethane Cable Tray

Tell us sizes, finish and quantity — or attach your BOQ. Jason replies personally with a factory price.

PDF, Excel, DWG or ZIP. If the upload fails, email the file to jasonzuo@cabletraysystem.com instead.

Your details go only to our sales desk. No spam, no third parties.