Products · Wire Mesh
Wire Mesh Cable Tray
Welded-wire basket tray for fast, flexible cable routing
Welded-wire basket tray for fast, flexible cable routing — popular in data centers, commercial buildings and light industrial plants. Bends, tees, crosses and reducers are cut and formed from straight sections on site, and our accessory system (Fastfix quick connectors, V-connectors, cable guiders) keeps installation moving without special tools.
1 / 2Technical Drawings & Dimensions
Schematic diagrams below show the mesh basket structure and the parameters that define a size. They are schematics only — not to scale, not engineering drawings, and not CAD drawings. Do not use them as fabrication drawings; model-specific dimensions are cited from the catalog table in your quotation.
Verified parameters
| Series | CM50 / CM85 / CM100 / CM150 |
|---|---|
| Straight-section length (L) | 3000 mm |
| Wire diameter | 5.0 mm (published tables) |
| Mesh pitch | 50 mm crosswise · 100 mm lengthwise (25 mm side on CM85) |
| Tolerances | Raw material ±0.05 mm · finished size ±2 mm |
Connection and support accessories fit wire diameters 3.5–6.0 mm (catalog pp.093–095).
Configure Your Cable Tray
Pick a style, material and finish — the configurator only offers combinations the published data supports, and your selection is written into the inquiry form at the bottom of the page (you can still edit it there).
Need a Custom Size?
Mesh sections nest tightly for efficient container loading. Connectors and small accessories are counted and boxed separately, labelled by type, inside the same shipment. Other widths, heights and wire diameters are confirmed with your quotation — send your BOQ or drawings with the inquiry below (PDF, Excel, DWG or ZIP).
Technical Specifications
General Specifications
| Type | Wire mesh / basket tray — CM50 / CM85 / CM100 / CM150 |
|---|---|
| Straight sections | 3000 mm long · wire diameter 5.0 mm · widths to 600 mm in the published tables |
| Heights | 50 / 85 / 100 / 150 mm in the published tables |
| Mesh pitch | 50 mm crosswise · 100 mm lengthwise (25 mm side on CM85) |
| Materials | Steel wire · stainless 201 / 304 / 316 |
| Finishes | Pre-galvanized 40 / 80 / 275 g/m² · hot-dip galvanized 45 / 65 / 85 µm · ZAM · powder coated (color customizable) |
| Tolerances | Raw material ±0.05 mm · finished size ±2 mm |
Published straight-section sizes from the Hongfeng product catalog pp.089–092. Piece weights are per piece (kg/pc) in the detailed table below; support-spacing load figures are catalog figures whose unit is not stated in the catalog — the quotation will state the table and unit used.
Load Data & Installation Conditions
Mesh tray loading depends on wire diameter, width and support spacing — use the support-spacing tables below (catalog pp.089–091). The catalog does not state the unit for those load figures, so the quotation will state the table and unit used. Widths over 600 mm, heights outside 50 / 85 / 100 / 150 mm and wire diameters other than 5.0 mm are confirmed with your quotation.
No SWL table is published for this page. Loading depends on wire diameter, width and support spacing; piece weight and support-spacing load figures are in the detailed tables below, and CM85 load selection is confirmed with your quotation.
Available Configurations
- Published straight sections: CM50 / CM85 / CM100 / CM150, 3000 mm long, 5.0 mm wire (catalog pp.089–092)
- Field-made fittings: cut the mesh to form bends, tees and level changes on site — no finished bend is sold as a mesh fitting
- Connection and support accessories fit wire diameters 3.5–6.0 mm (catalog pp.093–095)
- Open structure: cables are visible, ventilated and easy to add or re-route later
Size grid — CM straight sections
This grid lists dimensions only — series, width and height for the published straight sections. It carries no SWL or unit weight: piece weight (kg per piece) and support-spacing load figures are in the detailed tables below.
| Style | Width (mm) | Height (mm) | SWL (N/m) | Weight (kg/m) |
|---|---|---|---|---|
| CM50 | 50 | 50 | — | — |
| CM50 | 100 | 50 | — | — |
| CM50 | 150 | 50 | — | — |
| CM50 | 200 | 50 | — | — |
| CM50 | 300 | 50 | — | — |
| CM50 | 400 | 50 | — | — |
| CM50 | 450 | 50 | — | — |
| CM50 | 500 | 50 | — | — |
| CM50 | 600 | 50 | — | — |
| CM100 | 100 | 100 | — | — |
| CM100 | 150 | 100 | — | — |
| CM100 | 200 | 100 | — | — |
| CM100 | 300 | 100 | — | — |
| CM100 | 400 | 100 | — | — |
| CM100 | 450 | 100 | — | — |
| CM100 | 500 | 100 | — | — |
| CM100 | 600 | 100 | — | — |
| CM150 | 150 | 150 | — | — |
| CM150 | 200 | 150 | — | — |
| CM150 | 300 | 150 | — | — |
| CM150 | 400 | 150 | — | — |
| CM150 | 450 | 150 | — | — |
| CM150 | 500 | 150 | — | — |
| CM150 | 600 | 150 | — | — |
| CM85 | 100 | 85 | — | — |
| CM85 | 200 | 85 | — | — |
| CM85 | 300 | 85 | — | — |
| CM85 | 400 | 85 | — | — |
| CM85 | 500 | 85 | — | — |
| CM85 | 600 | 85 | — | — |
Source: Hongfeng product catalog pp.089–092 (straight sections, catalog numbers HF-Q-W-01A series). Materials Q / A / S4 / S6; customized drawings accepted; raw material tolerance ±0.05 mm, finished size tolerance ±2 mm.
This size grid lists dimensions only — no SWL or unit weight is published here. Piece weight and support-spacing load figures are in the detailed tables below; CM85 weight and load selection are confirmed with your quotation, which will state the table and unit used.
Detailed tables — straight sections & support-spacing loads
Published straight sections, 3000 mm long, wire diameter 5.0 mm. This table has no SWL column — the catalog publishes no SWL for mesh straight sections; load selection uses the support-spacing tables below.
| Series | Catalog No. | Length (mm) | Width (mm) | Height (mm) | Wire dia. (mm) | Weight per pc (kg) |
|---|---|---|---|---|---|---|
| CM50 | HF-Q-W-01A-5050 | 3000 | 50 | 50 | 5.0 | 3.15 |
| CM50 | HF-Q-W-01A-10050 | 3000 | 100 | 50 | 5.0 | 3.84 |
| CM50 | HF-Q-W-01A-15050 | 3000 | 150 | 50 | 5.0 | 4.56 |
| CM50 | HF-Q-W-01A-20050 | 3000 | 200 | 50 | 5.0 | 5.25 |
| CM50 | HF-Q-W-01A-30050 | 3000 | 300 | 50 | 5.0 | 6.66 |
| CM50 | HF-Q-W-01A-40050 | 3000 | 400 | 50 | 5.0 | 8.07 |
| CM50 | HF-Q-W-01A-45050 | 3000 | 450 | 50 | 5.0 | 8.76 |
| CM50 | HF-Q-W-01A-50050 | 3000 | 500 | 50 | 5.0 | 9.48 |
| CM50 | HF-Q-W-01A-60050 | 3000 | 600 | 50 | 5.0 | 10.89 |
| CM100 | HF-Q-W-01A-100100 | 3000 | 100 | 100 | 5.0 | 5.25 |
| CM100 | HF-Q-W-01A-150100 | 3000 | 150 | 100 | 5.0 | 5.94 |
| CM100 | HF-Q-W-01A-200100 | 3000 | 200 | 100 | 5.0 | 6.66 |
| CM100 | HF-Q-W-01A-300100 | 3000 | 300 | 100 | 5.0 | 8.07 |
| CM100 | HF-Q-W-01A-400100 | 3000 | 400 | 100 | 5.0 | 9.48 |
| CM100 | HF-Q-W-01A-450100 | 3000 | 450 | 100 | 5.0 | 10.17 |
| CM100 | HF-Q-W-01A-500100 | 3000 | 500 | 100 | 5.0 | 10.89 |
| CM100 | HF-Q-W-01A-600100 | 3000 | 600 | 100 | 5.0 | 12.30 |
| CM150 | HF-Q-W-01A-150150 | 3000 | 150 | 150 | 5.0 | 7.35 |
| CM150 | HF-Q-W-01A-200150 | 3000 | 200 | 150 | 5.0 | 8.07 |
| CM150 | HF-Q-W-01A-300150 | 3000 | 300 | 150 | 5.0 | 9.48 |
| CM150 | HF-Q-W-01A-400150 | 3000 | 400 | 150 | 5.0 | 10.89 |
| CM150 | HF-Q-W-01A-450150 | 3000 | 450 | 150 | 5.0 | 11.58 |
| CM150 | HF-Q-W-01A-500150 | 3000 | 500 | 150 | 5.0 | 12.30 |
| CM150 | HF-Q-W-01A-600150 | 3000 | 600 | 150 | 5.0 | 13.71 |
| CM85 | HF-Q-W-01A-10085 | 3000 | 100 | 85 | 5.0 | — |
| CM85 | HF-Q-W-01A-20085 | 3000 | 200 | 85 | 5.0 | — |
| CM85 | HF-Q-W-01A-30085 | 3000 | 300 | 85 | 5.0 | — |
| CM85 | HF-Q-W-01A-40085 | 3000 | 400 | 85 | 5.0 | — |
| CM85 | HF-Q-W-01A-50085 | 3000 | 500 | 85 | 5.0 | — |
| CM85 | HF-Q-W-01A-60085 | 3000 | 600 | 85 | 5.0 | — |
CM85 weights are NOT quoted on this page: the catalog's CM85 per-piece weights run against the trend of the CM50 / CM100 / CM150 tables at the same widths, wire diameter and length, and are pending factory confirmation of the weight column. CM85 sizes are listed; CM85 weight is confirmed with your quotation.
Load tables — by support spacing
Catalog support-spacing load figures for 5.0 mm wire. The catalog does not state the unit for these figures, so they are reproduced as catalog figures only — the quotation will state the table and unit used.
CM50 (height 50 mm)
| Width (mm) | 1.0 m spacing | 1.5 m spacing | 2.0 m spacing | 3.0 m spacing |
|---|---|---|---|---|
| 50 | 91 | 70 | 47 | 23 |
| 100 | 99 | 76 | 51 | 25 |
| 150 | 103 | 79 | 53 | 26 |
CM100 (height 100 mm)
| Width (mm) | 1.0 m spacing | 1.5 m spacing | 2.0 m spacing | 3.0 m spacing |
|---|---|---|---|---|
| 100 | 143 | 110 | 73 | 37 |
| 200 | 159 | 122 | 81 | 41 |
| 300 | 183 | 141 | 94 | 47 |
CM150 (height 150 mm)
| Width (mm) | 1.0 m spacing | 1.5 m spacing | 2.0 m spacing | 3.0 m spacing |
|---|---|---|---|---|
| 200 | 257 | 198 | 132 | 66 |
| 300 | 273 | 240 | 140 | 70 |
| 400 | 285 | 219 | 146 | 73 |
Source: catalog pp.089–091. Catalog note: the actual maximum load data is two to three times the safe-working-load comparison data (catalog wording, not restated here as a safety-factor promise).
No load table is published for CM85 (catalog p.092 carries the straight-section table and dimension drawing only) — CM85 load selection is confirmed with your quotation.
Materials & Surface Finishes
Available for this product family (CM50 / CM85 / CM100 / CM150 straight sections, 3000 mm long, 5.0 mm wire in the published tables). Exact availability per material–finish combination is confirmed with your quotation; final selection depends on the project environment.
Materials
Steel wire
Welded wire — the standard mesh tray material.
Stainless 201
Stainless grade for indoor and mildly corrosive environments.
Stainless 304
Stainless grade for corrosive environments.
Stainless 316
Stainless grade for highly corrosive environments.
Surface Finishes
Pre-galvanized
40 g/m²
Zinc-coated wire, commonly specified for indoor and dry environments.
Pre-galvanized
80 g/m²
Zinc-coated wire, commonly specified for indoor and dry environments.
Pre-galvanized
275 g/m²
Zinc-coated wire, commonly specified for indoor and dry environments.
Hot-dip galvanized
45 µm
Hot-dip coating, commonly specified for outdoor and harsh environments.
Hot-dip galvanized
65 µm
Hot-dip coating, commonly specified for outdoor and harsh environments.
Hot-dip galvanized
85 µm
Hot-dip coating, commonly specified for outdoor and harsh environments.
ZAM
Zinc-aluminum-magnesium coating
Coated steel for corrosive environments.
Powder coated
Color customizable
Coated finish in custom colors.
Wire Mesh Cable Tray Fittings & Accessories
Note (illustrative): bends, tees, crosses, reducers and level changes for mesh tray are mostly field-made — cut and formed from straight sections on site — so no finished mesh bend is pictured or sold here. Finished accessories supplied: Cable Guider (WA-DB-19290), Fastfix Splicer (WA-DB-25025), V Connector (WA-VC-100-500, for raised-floor support), Cross Clip (WA-CC-4237), Spider Bracket (WA-SB-9275), Ω Bar (WA-ΩB series), 50 / 100 Floor Stands and Bridge Type Floor Stands (catalog pp.093–095). No mesh cover parameter table is published in the catalog.
Also available for this tray
- WA-DB-19290 — Cable Guider: Mesh-tray accessory (catalog pp.093–095).
- WA-DB-25025 — Fastfix Splicer: Quick connector for mesh sections (catalog pp.093–095).
- WA-VC-100-500 — V Connector: For raised-floor support (catalog p.093).
- WA-CC-4237 — Cross Clip: Mesh-tray accessory (catalog pp.093–095).
- WA-SB-9275 — Spider Bracket: Carries trays on floors and cabinet tops (catalog pp.094–095).
- WA-ΩB series — Ω Bar: Carries trays on floors and cabinet tops (catalog pp.094–095).
- Floor Stands — 50 / 100 Floor Stands and Bridge Type Floor Stands: Floor supports for mesh runs (catalog pp.094–095).
Where It Is Used
Data centers & communications rooms
Open welded-wire construction that makes adding, moving and ventilating cables fast in machine rooms and data halls.
Commercial & light-industrial buildings
Lightweight, fast to install and cut to shape on site — suited to tight indoor schedules.
Under raised floors
V Connectors support trays under raised floors, with adjustable height (catalog p.093).
Floor & cabinet-top runs
Floor Stands, Spider Brackets and Ω Bars carry trays on floors and cabinet tops (catalog pp.094–095).
Application images are illustrative. Actual project specifications and installations may vary.
Manufacturing & Quality Control
Factory-direct supply from Liaocheng, Shandong — 50,000 m² site, 300 staff. The photos below show factory production and finishing areas; they illustrate the manufacturing environment and are not claimed to be a mesh-only line.
Forming lines and finished sections in the production hall.
Coating and finishing area for galvanized and coated sections.
Film-wrapped, palletised sections for export shipment.
Steel wire raw material; raw material tolerance ±0.05 mm.
Wire welded into the open basket mesh; mesh pitch 50 mm crosswise · 100 mm lengthwise (25 mm side on CM85).
Pre-galvanized, hot-dip galvanized, ZAM and powder coated finishes.
Dimensional checks to ±2 mm finished-size tolerance.
Mesh sections nest tightly for efficient container loading. Connectors and small accessories are counted and boxed separately, labelled by type, inside the same shipment.
Quality Documents
- ISO 9001:2015 — Guang Hui, certificate GH005-2023Q0022
- ISO 14001:2015 — Guang Hui, certificate GH005-2023E0015
- ISO 45001:2018 — Guang Hui, certificate GH005-2023S0015
- UDEM Attestation of Conformity, Low Voltage Directive 2014/35/EU, EN 61537:2007, No. M.2023.206.C88198 — model HF01A only
- JB/T 10216-2013 sample type-test reports — samples only, not a series-wide certification
Frequently Asked Questions
Are mesh bends, tees and reducers finished products?
No. The catalog position is field-made fittings: straight sections are cut on site to form bends, tees, crosses, reducers and level changes. Finished supply covers connectors and supports such as Fastfix, V Connectors and Guider.
Which straight-section sizes are published?
CM50 / CM85 / CM100 / CM150, 3000 mm long, 5.0 mm wire, widths to 600 mm. Other widths, heights and wire diameters are confirmed with your quotation.
How is support spacing chosen?
From the catalog support-spacing tables (1.0 / 1.5 / 2.0 / 3.0 m) by wire diameter and width. The catalog does not state the unit for those load figures, so the quotation will state the table and unit used.
What about MOQ, lead time and finishes?
MOQ and lead time are confirmed with your quotation. Finishes in the catalog are pre-galvanized 40 / 80 / 275 g/m², hot-dip galvanized 45 / 65 / 85 µm, ZAM and powder coated (color customizable).
What information is required for a quotation?
Series, material, finish, width and quantity — plus the project environment if finish selection matters. Use the configurator above and the inquiry form sends your selection automatically.
Can I submit a BOQ or technical drawing?
Yes — attach PDF, Excel, DWG or ZIP in the inquiry form below, or email the file to jasonzuo@cabletraysystem.com if the upload fails.
What affects the production lead time?
Size, material, finish, quantity and current production scheduling. Lead time is confirmed with your quotation — it is not fixed on this page.
Get a Project Quote
Request a Quote — Wire Mesh Cable Tray
Tell us sizes, finish and quantity — or attach your BOQ. Jason replies personally with a priced offer.