The standard that governs most cable tray systems worldwide is IEC 61537. It sets the requirements and the tests for cable tray systems and cable ladder systems — dimensions, mechanical strength, corrosion resistance, electrical continuity and fire behaviour — so that a tray from one factory can be compared with a tray from another on the same terms. If a specification names one standard for cable tray, it is usually this one. Knowing what it covers, and what it does not, is how a buyer checks a quotation instead of trusting it.
| Standard | What it covers | Where it is used |
|---|---|---|
| IEC 61537 | Cable tray and cable ladder systems: requirements and tests | International — the reference most specifications cite |
| BS EN 61537 | The European adoption of IEC 61537 | UK and Europe, cited as the EN version |
| NEMA VE 1 | Metal cable tray systems | United States and markets that follow US practice |
| BS 6946 | Metal channel cable support systems | Strut channel and support steel, not tray |
What IEC 61537 covers
IEC 61537 is the international standard for cable management systems — cable tray systems and cable ladder systems (IEC 61537). It defines the terms, the dimensions that must be declared, and the tests a tray system must pass: mechanical strength under load, impact resistance, corrosion resistance of the finish, electrical continuity across joints, and behaviour in fire. A tray that is made to IEC 61537 is tested as a system — tray, fittings, couplers and supports together — not as a single straight length on its own.
That last point matters when a buyer compares quotations. Two trays can have the same width, height and thickness and still differ, because the standard also covers how the pieces join and how the system carries load across a span. A quotation that states the tray type, the dimensions and the standard is checkable; a quotation that only states the dimensions is not.
Regional versions: BS EN 61537 and NEMA VE 1
BS EN 61537 is the European adoption of the same standard — same technical content, published as a British and European standard. A specification that asks for BS EN 61537 is asking for IEC 61537 in its European form, and a tray made to IEC 61537 meets it. In the United States the equivalent is NEMA VE 1, the metal cable tray standard, which is written in the same spirit but with its own test methods and load classes. A project in the Gulf or Southeast Asia usually cites IEC 61537; a project in the US cites NEMA VE 1. The two are not interchangeable on paper, so the standard named in the specification is the one the quotation must answer.
Our cable ladder and perforated cable tray are manufactured to IEC 61537, and the standard is stated on the quotation. Where a project cites NEMA VE 1 or another national standard, send the specification with the BOQ — the dimensions, the load class and the test requirements are checked against it before the quotation is issued.
BS 6946 and support steel
BS 6946 is a different standard, and it is often confused with the tray standard. It covers metal channel cable support systems — the strut channel, or C-channel, that holds the tray up — not the tray itself. It defines the channel sections, the fittings and the load data for support steel. A tray can comply with IEC 61537 and still fail on site if the supports under it were never specified to a standard at all. Both halves of the system need their own standard: IEC 61537 for the tray, BS 6946 for the strut channel that carries it.
What the standard does not decide
IEC 61537 does not choose the tray for a project. It does not say whether a run should be ladder or perforated, what width the tray should be, or which finish the environment needs. Those choices come from the cable schedule, the fill ratio, the environment and the specification — and they are confirmed with the quotation. The standard also does not fix a single load number for every tray: safe working load depends on the tray type, the material thickness, the width and the support spacing, so it is stated for the tray as ordered, not as a general claim.
That is why a quotation should never say only "complies with IEC 61537". It should say which tray, which dimensions, which finish and which load the system is rated for at the stated support spacing. If any of those four is missing, ask for it before ordering.
Five checks before you order
First, check the standard named in the specification and confirm the quotation answers that standard by name. Second, check the dimensions against the catalog range — our catalog range is 50–1200 mm wide, 10–200 mm high and 0.5–3.0 mm thick — and confirm any size outside it is stated as a custom item. Third, check the finish and the zinc layer or grade: HDG 45, 65 or 85 µm, pre-galvanized 40 or 80 g/m², stainless 304 or 316. The finish range is on our materials and finishes page. Fourth, check the fittings list: bends, tees, crosses, reducers and end caps in the same finish as the tray, counted from the same drawing. Fifth, check the support spacing the load is rated at, and that the supports are specified too.
How to read a certificate
A certificate is only useful if it names the issuer, the standard and the number. "CE certified" on its own says nothing — it is not how a cable tray certificate is written. A proper citation looks like this: UDEM Attestation of Conformity M.2023.206.C88198, issued for the low-voltage conformity of model HF01A. That gives the buyer three things to verify: who issued it, what it covers, and the number to quote back. A test report should be read the same way — the issuing laboratory, the standard tested against, and the date — and a mill certificate should match the grade and thickness ordered, not a near grade. If a supplier cannot give the issuer, the standard and the number, the document is not a certificate to rely on.
Send your specification for a check
Send your BOQ or specification and Jason replies personally — the standard, the dimensions, the finish and the load rating written on every line, so you can check the quotation against your specification before ordering.
Frequently asked questions
Is IEC 61537 the same as BS EN 61537?
Yes, in technical content. BS EN 61537 is the European adoption of IEC 61537. A specification that cites either one is asking for the same tray requirements and tests.
Does IEC 61537 cover wire mesh cable tray?
IEC 61537 covers cable tray systems and cable ladder systems, which includes wire mesh tray as a tray type. The load and span rules still depend on the tray as ordered — wire diameter, width and support spacing — and are confirmed with your quotation.
What does BS 6946 cover?
BS 6946 covers metal channel cable support systems — strut channel and its fittings. It is the standard for the supports under the tray, not for the tray itself.
How do I know a tray really meets IEC 61537?
Ask for the certificate by issuer, standard and number, and the test report behind it. A quotation that states the tray type, dimensions, finish and load rating at a stated support spacing is checkable; a quotation that only says "complies with IEC 61537" is not.
Do I need a different standard for a US project?
US projects usually cite NEMA VE 1 for metal cable tray. Send the specification with the BOQ and the tray is checked against the standard your project names.
Get a quotation for your project
Send your BOQ or drawings and the tray type, size, finish, and quantity you need. Quotations are prepared per BOQ — no fixed price list — and cover trays, fittings, and accessories to match. WhatsApp: +86 195 6350 7326 · Email: [email protected]
